Throttle Body Assembly Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (L5Q) . Disconnect the throttle body connector.
1	Throttle Body Retaining Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Procedure Remove the throttle body retaining bolts. Tighten 8.5 N.m (75 lb in)
2	Throttle Body Assembly

Callout

Component Name

Preliminary Procedure

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (L5Q) .
Disconnect the throttle body connector.

Throttle Body Retaining Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Procedure
Remove the throttle body retaining bolts.
Tighten
8.5 N.m (75 lb in)

Throttle Body Assembly