Manifold Absolute Pressure Sensor Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection Disconnect the manifold absolute pressure sensor connector.
1	Manifold Absolute Pressure Sensor Bolt CAUTION: Refer to Fastener Caution . Procedure Remove the manifold absolute pressure sensor bolt. Tighten 5 N.m (44 lb in)
2	Manifold Absolute Pressure Sensor

Callout

Component Name

Preliminary Procedures

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
Disconnect the manifold absolute pressure sensor connector.

Manifold Absolute Pressure Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Procedure
Remove the manifold absolute pressure sensor bolt.
Tighten
5 N.m (44 lb in)

Manifold Absolute Pressure Sensor