Evaporative Emission Canister Purge Solenoid Valve Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . |
|
| 1 | Evaporative Emission Pipe Connector. Procedure Disconnect the evaporative emission pipe connector. |
| 2 | Evaporative Emission Canister Purge Solenoid Valve Electrical Connector Procedure Disconnect the evaporative emission canister purge solenoid valve electrical connector. |
| 3 | Evaporative Emission Canister Purge Solenoid Valve Bolt
CAUTION:
Refer to Fastener Caution . Procedure Remove the evaporative emission canister purge solenoid valve bolt. Tighten 10 N.m (89 lb in) |
| 4 | Evaporative Emission Canister Purge Solenoid Valve |