Front Bumper Fascia Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement . Remove the head lamp. Refer to Headlamp Replacement (Projection/SBV)Headlamp Replacement (BASE/SBM) .
1	Front Bumper Fascia Side Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Bumper Fascia Bolt (Qty: 2) Tighten 6 N.m (53 lb in)
3	Front Bumper Fascia Retainer (Qty: 2)
4	Front Bumper Fascia Procedure Unclip from front bumper fascia guides. Pull forward to remove the front bumper fascia. Disconnect any electrical connectors. Transfer parts as needed.