Rear Seat Back Cushion Removal and Installation (Base)

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Base) , or Rear Seat Cushion Removal and Installation (60 Percent Seat) , or Rear Seat Cushion Removal and Installation (40 Percent Seat) . Remove the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement .
1	Rear Seat Back Cushion Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 24 N.m (18 lb ft)
2	Rear Seat Back Cushion Nut (Qty: 1) Tighten 24 N.m (18 lb ft)
3	Rear Seat Back Cushion