Q63 Evaporative Emission System Leak Detection Pump Assembly ()

Connector Part Information

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	Not Available	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Function	Terminal Type ID	Option
1	-	GY	3723	Evap Leak Check Module Changeover Valve Low Reference	I	-
2	-	-	-	Not Occupied	-	-
3	-	RD/WH	1340	Secondary Fused Battery Positive Voltage 13	I	-
4	-	BU	3722	Evap Leak Check Module Vacuum Pump Low Reference	I	-
5	-	RD/WH	1340	Secondary Fused Battery Positive Voltage 13	I	-
6	-	BN/RD	3724	Evap Leak Check Module Pressure Sensor Voltage Reference	I	-
7	-	BU/GN	3725	Evap Leak Check Module Pressure Sensor Signal	I	-
8	-	BK/GN	6281	Fuel Level Sensor Low Reference	I	-