LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Volt LT >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Diagnostic Information and Procedures >> DTC P257D-P257F >> Circuit/System Verification

Circuit/System Verification

  1. Vehicle in Service Mode.
  2. Verify the scan tool Hybrid/EV Powertrain Control Module 2 Hood Position parameter is Open when the hood is OPEN and Closed when the hood is CLOSED.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. All OK.