LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Volt LT >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Diagnostic Information and Procedures >> DTC B3006 >> Circuit/System Verification

Circuit/System Verification

  1. Vehicle in Service Mode.
  2. Verify the Body Control Module scan tool Hood Ajar Switch parameter is Open when the hood is open and Closed when the hood is closed.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. All OK.
scientia non olet · About LEMON Manuals