LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Traverse Premier, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Diagnostic Information and Procedures >> DTC P06ED (with IOU) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the tachometer sweeps when performing the scan tool Instrument Cluster Gauge Sweep control function.
    • If the tachometer does not sweep 

      Replace the P16 Instrument Cluster

    • Go to next step: If the tachometer sweeps 
  3. Engine running, verify the tachometer display matches the scan tool Engine Speed parameter in the ECM Engine Data List.
    • If tachometer display does not match the Engine Speed parameter 

      Perform Circuit/System Testing.

    • Go to next step: If tachometer display matches the Engine Speed parameter 
  4. All OK.
scientia non olet · About LEMON Manuals