LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Traverse Premier, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Diagnostic Information and Procedures >> DTC P0461-P0464 (without F48) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the DTC P0461, P0462, P0463, or P0464 are not set
    • If DTC P0461, P0462, P0463, or P0464 are set 

      Refer to Circuit/System Testing

    • Go to next step: If DTC P0461, P0462, P0463, and P0464 are not set 
  3. If equipped, verify the fuel level gauge needle sweeps when performing the scan tool Instrument Cluster Gauge Sweep control function.
    • If the fuel level gauge does not sweep 

      Replace the P16 Instrument Cluster

    • Go to next step: If the fuel level gauge sweeps 
  4. Verify the low fuel level indicator turns ON and OFF when commanding the scan tool All Indicators control function ON and OFF.
    • If the low fuel level indicator does not turn ON and OFF 

      Replace the P16 Instrument Cluster

    • Go to next step: If the low fuel level indicator turns ON and OFF 
  5. Verify the scan tool Fuel Level Sensor parameter is between 0.5 - 3.5 V and varies with fuel level.
    • If not between 0.5 - 3.5 V or does not vary with fuel level 

      Refer to Circuit/System Testing

    • Go to next step: If between 0.5 - 3.5 V and varies with fuel level 
  6. All OK.
scientia non olet · About LEMON Manuals