Navigation Signal Splitter Replacement (Cadillac)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel extension. Refer to Instrument Panel Extension Replacement (Cadillac) .
1	Navigation Signal Splitter Procedure Unclip the wire harness connector retainer and reposition the harness to access the splitter connections. Disconnect the electrical connections. Slide splitter from retaining tabs on the bracket to remove.

Callout

Component Name

Preliminary Procedure
Remove the instrument panel extension. Refer to Instrument Panel Extension Replacement (Cadillac) .

Navigation Signal Splitter

Procedure

Unclip the wire harness connector retainer and reposition the harness to access the splitter connections.
Disconnect the electrical connections.
Slide splitter from retaining tabs on the bracket to remove.