Circuit/System Verification
- Ignition ON, turn on the K175 Center Console Compartment Cooler Control Module.
- Verify the K175 Center Console Compartment Cooler Control Module activates and cools to less than 40° F (5° C) after approximately 40 minutes.
- If K175 Center Console Compartment Cooler Control Module does not cool
Refer to Circuit/System Testing - Test 1.
- Go to next step: If K175 Center Console Compartment Cooler Control Module does cool to less than 40° F (5° C) after approximately 40 minutes
- If K175 Center Console Compartment Cooler Control Module does not cool
- Verify the S145 Center Console Compartment Cooler Switch indicator illuminates when cooler is activated.
- If S145 Center Console Compartment Cooler Switch indicator does not illuminate
Refer to Circuit/System Testing - Test 2.
- If S145 Center Console Compartment Cooler Switch indicator is always illuminated
Refer to Circuit/System Testing - Test 2
- If S145 Center Console Compartment Cooler Switch indicator flashes On and Off
Refer to Circuit/System Testing - Test 1
- Go to next step: If K175 Center Console Compartment Cooler Control Module does illuminate properly
- If S145 Center Console Compartment Cooler Switch indicator does not illuminate
- All OK.