LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls And Fuel - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement (LV7)

Camshaft Position Sensor Replacement (LV7)

GM4230546Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LV7) .
  3. Disconnect the camshaft position sensor connectors.
1 Camshaft Position Sensor Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Procedure 
Remove the camshaft position sensor bolts.
Tighten 
10 N.m (89 lb in)
2 Camshaft Position Sensor (Qty: 2)
scientia non olet · About LEMON Manuals