LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Oil Pump Replacement (L5Q) >> Installation Procedure

Installation Procedure

  1. GM4165848Courtesy of GENERAL MOTORS COMPANY

    Release the tension using the suitable tool.

  2. GM4037094Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Oil pump is removed/installed as an assembly with the oil pump sprocket.

    Install the oil pump (2) with 2 oil pump gasket (3).

    3. CAUTION:

    Refer to Fastener Caution .

    NOTE:

    Tighten the bolts in sequence.

  3. Tighten the oil pump bolts (1) in sequence to 25 N.m (18 lb ft).
  4. Tighten the oil pump bolts (4) in sequence to 10 N.m (89 lb in).
  5. GM4037089Courtesy of GENERAL MOTORS COMPANY

    Install the crankshaft oil deflector (3).

    6. NOTE:

    Tighten the bolts in sequence.

  6. Install the 3 crankshaft oil deflector bolts (1) and tighten to 10 N.m (89 lb in).
  7. Install the 2 crankshaft oil deflector bolts (2) and tighten to 25 N.m (18 lb ft).
  8. GM4037084Courtesy of GENERAL MOTORS COMPANY

    Install the oil pump drive chain cover (2) and tighten to 10 N.m (89 lb in).

  9. Install the oil pan. Refer to Oil Pan Replacement (L5Q) .
scientia non olet · About LEMON Manuals