LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Installation Procedure

Installation Procedure

  1. GM4036753Courtesy of GENERAL MOTORS COMPANY

    Install the 12 hydraulic valve lash adjusters (1) in the bores in the cylinder head.

  2. Apply lubricant to the 12 hydraulic valve lash adjusters (1). Refer to Adhesives, Fluids, Lubricants, and Sealers (Europe LV7) , or Adhesives, Fluids, Lubricants, and Sealers (Europe L5Q) , or Adhesives, Fluids, Lubricants, and Sealers (North America LV7) , or Adhesives, Fluids, Lubricants, and Sealers (North America L5Q) .
  3. Install the hydraulic valve lash adjuster arm. Refer to Hydraulic Valve Lash Adjuster Arm Replacement , or Hydraulic Valve Lash Adjuster Arm Replacement (LV7) .
scientia non olet · About LEMON Manuals