LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Control Module Wiring Harness Replacement (L5Q) >> Installation Procedure

Installation Procedure

  1. GM4499155Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Engine Oil Level Indicator Control Module Wiring Harness - Install and tighten10N.m (89 lb in)

  2. GM4499154Courtesy of GENERAL MOTORS COMPANY

    Connect the engine oil level indicator control module wiring harness connector (1) to the engine oil level indicator control module wiring harness (2).

  3. GM4499156Courtesy of GENERAL MOTORS COMPANY

    Crankshaft Oil Deflector(3) - Install

  4. Crankshaft Oil Deflector Bolt(1)[3x]Tighten in sequence10N.m (89 lb in)
  5. Crankshaft Oil Deflector Bolt(2)[2x]Tighten in sequence25N.m (18 lb ft)
  6. Oil Pan Replacement (L5Q)  - Install
scientia non olet · About LEMON Manuals