LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Mount Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM4043888Courtesy of GENERAL MOTORS COMPANY

    Install the engine mount bracket (2) to the engine.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install engine mount bracket bolts (1) and tighten to 58 N.m (43 lb ft) + 60 to 75 degrees.
  3. Install the engine mount. Refer to Engine Mount Replacement .
  4. Remove the engine support fixture. Refer to Engine Support Fixture (LV7) , or Engine Support Fixture .
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  6. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  7. Install the right front bumper fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement .
  8. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals