LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Oil Pump Drive Chain and Oil Pump Installation (L5Q) >> Oil Pump Drive Chain Installation

Oil Pump Drive Chain Installation

GM3973932Courtesy of GENERAL MOTORS COMPANY
Oil Pump Drive Chain Installation

Callout Component Name
1 Crankshaft Sprocket
2 Crankshaft Balancer Key
3 Oil Pump Drive Chain

Procedure

  1. Loosen the oil pump bolts, if necessary, and tilt the oil pump assembly in order to install the drive chain over the oil pump and crankshaft sprockets.
  2. Once the drive chain is correctly positioned on the sprockets, the oil pump bolts can be hand tightened.
4 Oil Pump Drive Chain Tensioner
NOTE:

Ensure the tensioner spring is retained in the correct position prior to installation.
5 Oil Pump Drive Chain Tensioner Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N. m (89 lb in)
scientia non olet · About LEMON Manuals