Range Selector Lever Cable Adjustment
- Set the park brake and chock the wheels.
Slide the retainer lock (1) forward to expose the cable adjustment retainer (2).
- Using a suitable tool, raise the cable adjustment retainer (2) to the unlock position.
- Verify that the range selector lever cable lever is in position "P" by turning the range selector lever cable lever counterclockwise (arrow).
Verify that the transmission control lever (1) is in position "P".
Depress the cable adjustment retainer (2) locking the retainer completely.
- Slide the retainer lock (1) rearward to cover the cable adjustment retainer (2).
- Check the transmission range select lever in all gear selections for proper operation.