Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition ON.
- Verify with a scan tool that no other DTC is set.
- If any other DTC is set
- Go to next step: If no other DTC is set
- Operate the vehicle within the Conditions for Running the DTC. It may be helpful to operate the vehicle within the conditions identified from the Freeze Frame/Failure Records data
- Verify DTC P157A is not set.
- If the DTC P157A is set.
Refer to Circuit/System Testing.
- Go to next step: If the DTC P157A is not set.
- If the DTC P157A is set.
- All OK.