Conditions for Running the DTCs
WARNING: This page is about a different variant/trim than selected.
P144E and P144F
- DTC P00C7, P00E9, P00EA-P00EC, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201-P0208, P020A-P020F, P0216, P021A, P021B, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277, P0279, P0280, P0282, P0283, P02EE, P02EF, P02F0-P02F5, P0405, P0406, P049D, P062B, P062D, P0772, P0773, P111E, P113C, P118F, P1248, P1249, P124A-P124F, P126A, P2032, P2033, P2084, P2085, P2147, P2148, P2150, P2151, P2153, P2154, P2156, or P2157 is not set,
- Ignition voltage is greater than 11 V.
- Vehicle speed is greater than 0 km/h (0 mph).
- The ECM is commanding a DPF regeneration.
The DTC runs continuously when the above conditions are met.