Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P2452
- DTCs P2453, P2454, P2455, P2456, or P262B are not set.
- The ignition has been OFF for greater than 10 s.
- The engine is not running.
- The ignition is ON.
The DTC runs when the above conditions are met.
P2454, P2455
- The ignition is On or the engine is running.
- The ignition voltage is greater than 11 V.
The DTCs run when the above conditions are met.
P2456
- DTCs P2454 and P2455 are not set.
- The ignition is On or the engine is running.
- The ignition voltage is greater than 11 V.
The DTC runs when the above conditions are met.