Control Valve Body Plate Assemble
WARNING: This page is about a different variant/trim than selected.
Control Valve Body Plate Assemble
| Callout | Component Name |
|---|---|
| 1 | Control Valve Body Ball Check Valve [6x] |
| 2 | Control Valve Body Locating Pin [2x] |
| 3 | Control Valve Body Spacer Plate
NOTE:
Inspect the channel plate bolt pass through holes for damage or brinelling. Any damage will cause incorrect pressure switch operation. Replace as necessary. |
| 4 | Control Valve Body Spacer Plate Retainer [2x] |