Actions Taken When the DTC Sets

WARNING: This page is about a different variant/trim than selected.

DTCs listed in the DTC Descriptor Category = Type A DTC

Autostart/Autostop = Disabled
Default shift pattern = Enabled
Grade braking = Disabled
Manual Shift Control = Disabled
Neutral Idle Mode = Disabled
Powertrain braking = Disabled
TCC Control = Disabled
Transmission Adaptive Values Learn = Freeze current adapt values
{P2731} Transmission gear allowed = Reverse or Gear 1
{P2732} Transmission gear allowed = Reverse or Gear 5
{P2733} Transmission gear allowed = Reverse or Gear 7