Conditions for Running the DTC

• DTC P281B, P281D, P281E = Not set
• {P2817} Q77H Transmission Control Solenoid Valve 8 = On
• {P2818} Q77H Transmission Control Solenoid Valve 8 = Off
• {P0741} Q77J Transmission Control Solenoid Valve 9 = On
• Accelerator Pedal Position = 0 to 1%
• Battery Voltage = Greater than 9 V
• Engine Speed = Greater than 400 RPM
• Engine Torque = 55 to 800 N.m (40 to 590 lb ft)
• High Side Driver 2 = On
• Ignition = On
• Power Mode Status = Accessory or Ignition
• Transmission Fluid Temperature = 7 to 130°C (20 to 266°F)
• Transmission Range P, R, N
• Vehicle Speed = 3 to 9 km/h (2 to 6 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s