Conditions for Running the DTC

P0711

• DTC P0300-P0304, P0712, P0713, P16F3, P2818 = Not set
• DTCs related to the following system/component = Not Set
  • B14A Transmission Output Shaft Speed Sensor
  • B34 Engine Coolant Temperature Sensor
  • B75 Mass Air Flow Sensor
  • B107 Accelerator Pedal Position Sensor
  • B115 Vehicle Speed Sensor
  • Q17 Fuel Injector
• Accelerator Pedal = Greater than 5%
• Engine Coolant Temperature = -40 to 150°C (-40 to 302°F)
• Engine Speed = Greater than 500 RPM
• Engine Torque = Greater than 50 N.m (36 lb ft)
• Ignition Voltage = Greater than 9 V
• Transmission Fluid Temperature = -40 to 150°C (-40 to 302°F)
• Vehicle Speed = Greater than 10 km/h (6 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met

P0712, P0713

• Battery Voltage = Greater than 9 V
• Run/Crank Ignition 1 Voltage = Greater than 9 V

Frequency the DTC runs = Continuously - After the running conditions are met