Actions Taken When the DTC Sets

DTCs listed in the DTC Descriptor Category = Type A DTC

• {P2802, P2803, P2805} M64 Starter Motor = Disabled
• Autostart/Autostop = Disabled
• Default shift pattern = Enabled
• Grade braking = Disabled
• High Side Driver 1 = Off
• {P0707, P0708} High Side Driver 2 = Off
• Line Pressure Command = Maximum
• Neutral Idle Mode = Disabled
• Powertrain braking = Disabled
• Tap Up & Tap Down = Disabled
• TCC Control = Disabled
• Transmission Adaptive Pressure Control = Freeze current adapt values
• High Side Driver 1, 2 = Off