3-8 Clutch Releases
WARNING: This page is about a different variant/trim than selected.
S3-8 Solenoid
The S3-8 solenoid is energized off allowing S38 VFS SIG fluid to exhaust thru orifice #1. Spring pressure shifts the 3-8 clutch regulator valve to allow 38 CLUTCH fluid to exhaust into EX BACKFILL from the 3-8 clutch assembly.
3-8 Clutch Assembly
The 3-8 clutch is released allowing 38 CLUTCH fluid to exhaust thru the 3-8 clutch regulator valve.