Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P040B, P041B
- The engine is running.
- The ignition voltage is greater than 11 V.
- The engine has been OFF for greater than 8 hours.
- DTC P262B is not set.
The DTCs run continuously when the above conditions are met.
P040C, P040D, P040E, P041C, P041D, P041E
- The ignition is ON.
- The ignition voltage is greater than 11 V.
The DTCs run continuously when the above conditions are met.