Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0335 Condition 1
- DTC P0016, P0102, P01CB, P01CC, P01CD, P01CE, P01CF, P01D0, P01D1, P01D2, P0315, P0506, P0507 = Not set
- Camshaft Position Sensor = Signal received
- MAF Sensor = Greater than 2 g/s
- Starter = Active
Condition 2
- Crankshaft and camshaft position sensors have been learned.
- Engine Speed = Greater than 550 RPM
- Starter = Inactive
Frequency the DTC runs = Continuously - After the running conditions are met
P0336 Condition 1
- DTC P0016, P0102, P01CB, P01CC, P01CD, P01CE, P01CF, P01D0, P01D1, P01D2, P0315, P0506, P0507 = Not set
- Engine Speed = Greater than 450 RPM
- Crankshaft Position Sensor = Not Detected
Frequency the DTC runs = Continuously - After the running conditions are met