Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P02E0

The ECM detects an open circuit condition of the intake air flow valve control circuit.

P02E2

The ECM detects that the intake air flow valve control circuit voltage is less than a calibrated threshold.

P02E3

The ECM detects that the intake air flow valve control circuit voltage is greater than a calibrated threshold.

P02EB

The ECM detects that the commanded state of the driver and the actual state of the control circuit do not match.

P122B

The ECM detects an open circuit on the intake air flow valve control circuit.

P122C

The ECM detects a short circuit on the intake air flow valve control circuit voltage for greater than 0.5 s.

P1425

The ECM detects that the intake air flow valve control circuit internal temperature is greater than a calibrated threshold.