Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Fuel System Description
| Circuit | Description |
|---|---|
| 5 V Reference | Regulated voltage supplied by the control module. |
| Signal | The control module input circuit has an internal resistance connected to 5 V. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| B47B Fuel Rail Pressure Sensor - Fuel Rail Pressure Sensor 1 | The sensor measures the pressure in the component: Fuel Rail - The signal voltage increases when the pressure increases. |
| B47B Fuel Rail Pressure Sensor - Fuel Rail Pressure Sensor 2 | The sensor measures the pressure in the component: Fuel Rail - The signal voltage decreases when the pressure increases. |
| K20 Engine Control Module | The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |