LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Diagnostic Information And Procedures (P0016-P054F)) >> Diagnostic Information and Procedures >> DTC P0171 or P0172 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

In order to compensate for variations in the fuel system, the fuel mass observer function adapts a correction quantity using the difference between the measured and modeled oxygen content of the exhaust gas coming from NOx Sensor 1. A DTC will set when the correction quantity reaches the maximum control limit. If the correction quantity is below the calibrated feedback limit for a specified time, the corresponding "Fuel System Lean" fault will be set. If the correction quantity is above the calibrated feedback limit for a specified time, the corresponding "Fuel System Rich" fault will be set.