Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0045, P0046, P0047, P0048, P0071, P0072, P0073, P0074, P0116, P0117, P0118, P0119, P0128, P0234, P0299, P111E, P2564, P2565, P2598, P2599 = Not set
BARO Sensor = 60 to 103 kPa (8.7 to 14.9 PSI)
Brake Pedal Position Sensor Signal = Released
Engine Coolant Temperature Sensor = 60 to 150°C (140 to 302°F)
Engine Speed = 700 to 950 RPM
Ignition Voltage = 9 to 30 V

Frequency the DTC runs = Once @ Ignition Off After the running conditions are met