Removal Procedure
WARNING: This page is about a different variant/trim than selected.
 Courtesy of GENERAL MOTORS COMPANY
|
Quick Connector Clamp (3) - Loosen
- Charge Air Cooler Outlet Air Hose (1) @ Throttle Body (2) - Remove
 Courtesy of GENERAL MOTORS COMPANY
|
Disconnect the electrical connector. (1)
 Courtesy of GENERAL MOTORS COMPANY
|
Throttle Body Bolt (3) - Remove [4x]
- Remove the throttle body. (1)
- Remove and DISCARD the throttle body gasket. (2)