Removal Procedure
WARNING: This page is about a different variant/trim than selected.
WARNING:
WARNING:
- Battery Negative Cable Disconnection and Connection - Disconnect
- Lower the fuel tank, to get enough space to remove the fuel feed pipe-fuel filter to fuel feed pipe. Refer to Fuel Tank Replacement .
Disconnect the fuel feed pipe-fuel filter to fuel feed pipe (3) from the fuel filter assembly (2). Refer to Plastic Collar Quick Connect Fitting Service .
- Close all connections with suitable closure plugs.
- Disconnect the electrical connector. (5)
- Unclip the fuel tank fuel feed pipe (3) from the 2 fuel tank brackets (1, 4) and the fuel pressure sensor clip (6).
NOTE:
The fuel pressure sensor can not be replaced individually.