Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Install the charge air cooler outlet air hose to the vehicle.
- Charge Air Cooler Outlet Air Hose (3) @ Throttle Body - Install
- Clip in the radiator inlet hose retainer (2).
- NOTE:
The clamp (1) must lock audible.
Charge Air Cooler Outlet Air Hose (2) @ Charge Air Cooler (3) - Install
Front Bumper Fascia Extension (3) - Install - Front Bumper Fascia Extension Replacement (without Front Bumper Shutter)Front Bumper Fascia Extension Replacement (with Front Bumper Shutter)
- Battery Negative Cable Disconnection and Connection - Connect
NOTE:
The clamp (1) must lock audible.