Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- NOTE:
Ensure the outlet duct is fully seated to the mating surfaces before clamping. Verify that the cuff is not rolled under.
Air Cleaner Outlet Duct (3) - Install
- Air Cleaner Outlet Duct Clamp (1, 2) - Tighten [2x] 3.5 N.m (31 lb in)
- NOTE:
There must be a noticeable click noise.
Positive Crankcase Ventilation Heater (1) - Install
CAUTION: