LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Dangers, Warnings, And Cautions) >> Introduction >> Installing Hoses without Twists or Bends Caution

Installing Hoses without Twists or Bends Caution

WARNING: This page is about a different car, the 2018 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

scientia non olet · About LEMON Manuals