X210 Inside Rear View Mirror Harness to Body Harness
Connector Part Information
|
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-14 (GN) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| III | 13327166 | J-35616-65B (LT BU) | J-38125-12A | 963716-2 | Lear 7 | H | H |
| IV | 13327167 | J-35616-65B (LT BU) | J-38125-12A | 963716-2 | Lear 7 | J | J |
| Pin | Size | Color | Circuit | Terminal Type ID | Option | Function | Pin | Size | Color | Circuit | Terminal Type ID | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | - | - | - | - | - | Not Occupied | 1 | - | - | - | - | - |
| 2 | 0.13 0.35 |
YE YE |
3197 3197 |
II I |
-CE1+ASV+UHX -CE1-UHX+ASV |
Humidity Temperature Sensor Signal Humidity Temperature Sensor Signal |
2 | 0.35 | YE/BU | 3197 | III | - |
| 3 | 0.13 0.35 |
GY/GN VT |
7565 7565 |
II I |
-CE1+ASV+UHX -CE1-UHX+ASV |
Windscreen Temp Sensor Signal Windscreen Temp Sensor Signal |
3 | 0.35 | GN/GY | 7565 | III | - |
| 4 | 0.13 0.35 |
BK BK |
7566 7566 |
II I |
-CE1+ASV+UHX -CE1-UHX+ASV |
Humidity/Windscreen Temp Sensor Low Reference Humidity/Windscreen Temp Sensor Low Reference |
4 | 0.35 | BK/GY | 7566 | III | - |
| 5 | 0.13 0.35 |
GY/BU GY/BU |
7564 7564 |
II I |
-CE1+ASV+UHX -CE1-UHX+ASV |
Humidity Sensor Signal Humidity Sensor Signal |
5 | 0.35 | GY/BN | 7564 | III | - |
| 6 | 0.13 0.35 |
GN GN |
597 597 |
II I |
-CE1+ASV+UHX -CE1-UHX+ASV |
5V Reference 5V Reference |
6 | 0.35 | YE/GN | 597 | III | - |
| 7 | 0.35 | BU | 2500 | I | - | High Speed GMLAN Serial Data (+) 1 | 7 | 0.35 | BU | 2500 | III | - |
| 8 | 0.35 | WH | 2501 | I | - | High Speed GMLAN Serial Data (-) 1 | 8 | 0.35 | WH | 2501 | III | - |
| 9 | 0.35 | RD/BN | 1440 | I | - | Battery Positive Voltage | 9 | 0.5 | RD/BN | 1440 | IV | - |
| 10 | 0.35 | GN | 5060 | I | - | Low Speed GMLAN Serial Data | 10 | 0.35 | GN | 5060 | III | - |
| 11 | 0.5 | VT/GY | 139 | II | - | Run/Crank Ignition 1 Voltage | 11 | 0.75 | VT/GY | 139 | IV | - |
| 12 | 0.35 | WH | 3152 | I | - | Lane Departure Warning Indicator Control | 12 | 0.35 | WH | 3152 | III | - |
| 13 | 0.5 | GN/WH | 1324 | II | - | Backup Lamp Control | 13 | 0.75 | GN/WH | 1324 | IV | - |
| 14 | 0.5 0.35 |
BK BK |
1550 1550 |
II I |
(UHX+DD8)/(CE1+DD8)/(DD8-CE1-UHX) -CE1-DD8+UHX |
Ground Ground |
14 | 0.75 | BK | 1550 | IV | - |
| 15 | 0.35 | WH/BU | 5986 | I | - | Serial Data Communication Enable | 15 | 0.35 | WH/BU | 5986 | III | - |
| 16 | 0.35 | GY | 3153 | I | - | Lane Departure Warning Disable Switch Signal | 16 | 0.35 | GY/WH | 3153 | III | - |
| 17 | 0.35 | BU | 2500 | I | - | High Speed GMLAN Serial Data (+) 1 | 17 | 0.35 | BU | 2500 | III | - |
| 18 | 0.35 | WH | 2501 | I | - | High Speed GMLAN Serial Data (-) 1 | 18 | 0.35 | WH | 2501 | III | - |