Removal Procedure
- Remove the left rear tire and wheel assembly. Tire and Wheel Removal and Installation
Brake Pipe Fitting (1) - Remove
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Cap the intermediate brake pipe unit to prevent brake fluid loss and contamination.
- Electrical Connector (2) - Disconnect
Brake Pipe (1)@Retainer (2) - Disconnect [3x]
Brake Pipe (2)@Retainer (1) - Disconnect
Brake Pipe (2)@Retainer (1) - Disconnect [3x]
Brake Pipe Fitting (1) - Remove
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
- Brake Pipe - Remove
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .