Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Tire and Wheel Removal and Installation - Remove
Cap the brake caliper inlet port to prevent brake fluid loss and contamination.
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
- Rear Brake Hose (3)@Brake Hose Fitting Bolt (2) - Remove
- DISCARD the brake hose fitting gaskets. (1) [2x]
Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Rear Brake Hose (2)@Brake Pipe Fitting (4) - Remove
- Brake Hose Retainer (3)@Rear Brake Hose (2) - Release
- Remove the rear brake hose from the vehicle. (2)