LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Front Brake Pipe Replacement - Left Side >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Brake Fluid Irritant Warning .

  1. Remove the left front tire and wheel assembly. Tire and Wheel Removal and Installation
  2. GM3650415Courtesy of GENERAL MOTORS COMPANY

    Radiator Surge Tank Clip (2) - Remove

  3. Hang out the radiator surge tank without disconnecting the hoses and lay down carefully. (1)
  4. GM3764124Courtesy of GENERAL MOTORS COMPANY

    Brake Pipe Fitting (3) - Remove

  5. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
  6. Cap the EBM brake pipe inlet ports to prevent brake fluid loss and contamination.
  7. Brake Pipe (2)@Retainer (1) - Disconnect
  8. GM3764125Courtesy of GENERAL MOTORS COMPANY

    Front Brake Pipe Fitting (1) - Remove

  9. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
  10. Cap the brake hose fitting to prevent brake fluid loss and contamination.
  11. Brake Pipe (2)@Retainer (3) - Disconnect
  12. Remove the brake pipe.