Clearance and Flushness Specifications (Hatchback)

Fig 1: Identifying Body Components For Clearance And Flushness (Hatchback)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name	Dimension
1	Hood @ Headlamp	6.0 mm ± 1.5 mm
2	Hood @ Front Fender	3.0 mm ± 0.75 mm
3	Front Side Door @ Body Side Outer Upper Panel	8.0 mm ± 1.25 mm
4	Rear Side Door @ Body Side Outer Upper Panel	8.0 mm ± 1.25 mm
5	Rear Side Door @ Quarter Outer Panel	3.5 mm ± 0.75 mm
6	Front Side Door @ Rear Side Door	3.5 mm ± 0.75 mm
7	Front Fender @ Front Side Door	3.5 mm + 0.75 mm - 0.5
8	Rear Side Door @ Rocker Outer Panel	4.5 mm ± 1.5 mm
9	Front Side Door @ Rocker Outer Panel	4.5 mm ± 1.5 mm
10	Liftgate @ Rear Bumper Fascia	5.5 mm ± 1.5 mm
11	Liftgate @ Roof	5.5 mm ± 1.0 mm
12	Liftgate @ Body Side Outer Upper Panel	5.5 mm ± 1.5 mm
13	Liftgate @ Quarter Outer Panel	4.0 mm ± 1.0 mm