Rear Compartment Lid Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Battery Negative Cable Disconnection and Connection
1	Rear Compartment Lid Bolt [4x] CAUTION: Fastener Caution Procedure Disconnect the electrical connector. Tighten 22 N.m (16 lb ft) NOTE: A second technician is required.
2	Rear Compartment Lid Procedure Transfer components as necessary. Rear Compartment Lid - Adjust - Clearance and Flushness Specifications (Notchback)

Callout

Component Name

WARNING:

When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure Battery Negative Cable Disconnection and Connection

Rear Compartment Lid Bolt [4x]

CAUTION:

Fastener Caution

Procedure
Disconnect the electrical connector.
Tighten
22 N.m (16 lb ft)

NOTE:

A second technician is required.

Rear Compartment Lid

Procedure

Transfer components as necessary.
Rear Compartment Lid - Adjust - Clearance and Flushness Specifications (Notchback)