Valve Rocker Arm Cover Insulator Replacement - Right Side (LT1 With Z52)

GM3416543

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Remove the right side intake manifold cover. Refer to Intake Manifold Cover Replacement (LT1 - Right) Intake Manifold Cover Replacement (LT1 - Left) .
Remove the evaporative emission canister purge pipe. Refer to Evaporative Emission Canister Purge Pipe Replacement .
Remove the oil tank to right hand rocker arm cover and air duct to oil tank positive crankcase ventilation hose/pipe/tubes. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LT1 - Oil Tank to RH Rocker Arm Cover) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LT1/LT4 - Air Duct To Oil Tank) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LT1 - LH Rocker Arm Cover to Air Duct) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LT1 - RH Rocker Arm Cover to Air Duct) .

1

Valve Rocker Arm Cover Insulator Fasteners

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

2

Valve Rocker Arm Cover Insulator