Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Master Cylinder Primary Piston Assembly |
| Master Cylinder Primary Piston Retainer |
| Master Cylinder Secondary Piston Seal |
| Master Cylinder Secondary Piston Seal Retainer |
| Power Brake Booster Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake and Accelerator Pedal Assembly Bolt | 20 N.m (15 lb ft) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Brake Master Cylinder Bolt | 22 N.m (16 lb ft) |
| Brake Master Cylinder Reservoir Bolt | 2.5 N.m (22 lb in) |
| Brake Master Cylinder Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pipe Fitting | 20 N.m (15 lb ft) |
| Brake Pipe Fitting at Brake Pressure Modulator Valve (BPMV) | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Primary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Secondary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Power Brake Booster Bolt | 22 N.m (16 lb ft) |