Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Tire and Wheel Removal and Installation - Remove
Front Brake Hose (3) @ Brake Hose Fitting Bolt (1) - Remove
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
- Cap the brake caliper inlet port to prevent brake fluid loss and contamination.
- DISCARD the brake hose fitting gaskets. (2) [2x]
Front Brake Hose (2) @ Front Brake Pipe Fitting (1) - Remove
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Cap the brake hose fitting to prevent brake fluid loss and contamination.