LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Volt Premier >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Master Cylinder Reservoir Hose Replacement >> Installation Procedure

Installation Procedure

GM4084587Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  1. Brake Pipe Fitting (3) @ Brake Pressure Modulator Valve - Install and tighten 32 N.m (24 lb ft)
  2. Connect the brake master cylinder reservoir hose (2) to the brake master cylinder reservoir (1).
  3. GM4084518Courtesy of GENERAL MOTORS COMPANY

    Radiator Surge Tank (1) - Install

  4. Radiator Surge Tank Bracket Clip (2) - Install
  5. Dash Upper Extension Panel Opening Cover Replacement - Install
  6. Hydraulic Brake System Bleeding 
scientia non olet · About LEMON Manuals