| DEFINITION: Brake system releases and returns to rest slowly; vehicle motion is hindered by brake system briefly after release of brake pedal. |
| 1 |
Were you sent here from the Hydraulic Brake Symptom table? |
Go to Step 2 |
Go to Symptoms - Hydraulic Brakes |
| 2 |
- Inspect the hydraulic brake and assist system for the following conditions:
- Improper operation of caliper pistons
- Internally damaged flexible brake hoses; hindering brake release
- Contaminated brake fluid
- Damaged or improperly operating master cylinder
- Damaged or improperly operating hydraulic booster, if equipped
- Binding, bent or damaged pedal pushrod, pedal, or pedal bracket
- Adjust, repair or replace components as necessary. Hydraulic Brake System Diagnosis
Did you find and correct a condition? |
Go to Step 4 |
Go to Step 3 |
| 3 |
- Inspect the disc brake system for the following conditions:
- Damaged or excessively worn caliper hardware and/or lining hardware
- Distorted or damaged linings
- Lack of lubrication or excessive corrosion on metal to metal contact surfaces
- Bent or damaged caliper or mounting component
- Adjust, repair or replace components as necessary. Disc Brake System Diagnosis
Did you find and correct a condition? |
Go to Step 4 |
Go to Symptoms - Hydraulic Brakes |
| 4 |
- Install or connect components that were removed or disconnected during diagnosis.
- Road test the vehicle in order to confirm proper operation. Brake System Vehicle Road Test
Is the condition still present? |
Go to Step 2 |
System OK |